Repair of the brake sytem

One of the simplest automotive maintenance jobs is the repair of the brake sytem, and a brake lathe can aid this.

A brake lathe is an efficient tool for curing noise and vibration problems, often prolonging the life of brake systems.
Proper maintenance of your brake lathe, just like scheduled vehicle maintenance, will extend the life of your equipment. Furthermore, a well-maintained lathe will ensure an accurate cut and the correct surface finish on each rotor that your machine.


There are two types of brake lathes. An on-car lathe often does a reliable job, because it's installed in the same position as the brake caliper, basically mimicking the movement of the wheel with regard to the car's calibrations. This provides the most accurate resurfacing possible. For an off-car lathe, or bench lathe, the rotor is removed from the car and mounted to the lathe. This type of lathe relies more on its own alignment, which is easily thrown out of spec from damage or frequent use. 




评论

发表评论

此博客中的热门博文

The principle of dry ice blasting machine——will the removal of carbon deposits by dry ice blasting machine damage the engine?

图片
Dry ice cleaning machine principle: dry ice blasting, also known as cold spray, is based on compressed air as the power and medium, dry ice particles as accelerated particles, which are sprayed onto the surface of the cleaning object through a special spray cleaning machine, using the momentum change ( Δ mv) of solid dry ice particles, heat transfer, such as lifting, melting, etc., so that the stains, oil stains, residual impurities, etc. on the surface of the cleaned object are quickly frozen, and then condensed, embrittled and separated with the air flow.                            Cleaning effect comparison With the popularity of dry ice blasting, dry ice blasting is widely used in marine ships, aerospace, historical buildings, industrial rust removal, printing equipment, cold chain transportation, chemical boilers, industrial molds and other fields.   In addition to the atmosphere of the landscape or stage, dry ice is also a cleaning material. As a recognized safe, environmentally
阅读全文

What do you know about four-wheel alignment?

图片
 What is four-wheel alignment? There is a certain relative position between the four wheels of the vehicle, the steering mechanism, and the front and rear axles. The relative position is the standard value specified by the manufacturer. The installation to adjust and restore this position is the four-wheel alignment. Why does the vehicle need to be four-wheel alignment? Carrying out four-wheel alignment can ensure the straightness of the vehicle, driving stability and automatic steering function, etc., reduce tire wear, and avoid multiple failures of the vehicle. Under what circumstances need to do four-wheel alignment? Four-wheel alignment is different from maintenance and is a means of maintenance. There is no need for four-wheel alignment for the vehicle if there is no problem. Generally, it is recommended to do four-wheel alignment for the vehicle in the following situations: A) The vehicle is off track When the vehicle turns left or right involuntarily, it needs to keep the steeri
阅读全文

If you don't know what is carbon cleaning machine , then It's time to know about it .

图片
1. Target and expectation The carbon deposition in the vehicle engine while the engine works, which makes the engine launching performance, the fuel consumption and the exhaust gas standard worse. the cleaning off process will eliminate the internal carbon deposition and  recover the original performance of the engine, and promote the accelerator response, and reduce the waste gas exhausting. the burning becomes more full, lower the fuel consumption,and make the useful life of the engine longer. This equipment is mainly used for cleaning engine carbon deposition, when vehicles exist the following problems, please solve the trouble first ,then use this equipment for carbon cleaning 1)Auto idle instability 2)Piston ring seal failure, burn oil 3)spark plug of aging ignition system 4)ternary catalytic sintering 5)fuel spray nozzle blockage 6)exhaust system Seal intake failure 2. Working principle and process Oxyhydrogen carbon removal machine is one our company oxyhydroge
阅读全文