CX5auto.com for all garage equipments

1. Target and expectation The carbon deposition in the vehicle engine while the engine works, which makes the engine launching performance, the fuel consumption and the exhaust gas standard worse. the cleaning off process will eliminate the internal carbon deposition and  recover the original performance of the engine, and promote the accelerator response, and reduce the waste gas exhausting. the burning becomes more full, lower the fuel consumption,and make the useful life of the engine longer. This equipment is mainly used for cleaning engine carbon deposition, when vehicles exist the following problems, please solve the trouble first ,then use this equipment for carbon cleaning 1)Auto idle instability 2)Piston ring seal failure, burn oil 3)spark plug of aging ignition system 4)ternary catalytic sintering 5)fuel spray nozzle blockage 6)exhaust system Seal intake failure 2. Working principle and process Oxyhydrogen carbon removal machine is one our company oxyhydroge

Tire changer is a device that removes the car tires from the hub, installs and inflates. It is mainly used for tire repair, replacement, installation and so on. It is a car repair shop, car tire shop and car equipment factory and other necessary equipment. Tire changer is mainly divided into two designs: (With assist arm) and(Without assist arm). CX5-LEFT, CX5-GREAT, CX5-RIGHT are with assist arm, of which LEFT is the left assist arm, RIGHT is the right assist arm, GREAT is a double assist arm, as to choose the left or right mainly to see the master maintenance habits. These are for the Run-flat tire, low-profile and Reversed tire. The CX5-202GB and CX5-201GB without auxiliary arms are two models, the 202GB is the Tilt back design, the 201GB is the Swing arm design, the 201GB is relatively simple, but the performance can be Meet the daily operation of ordinary tires.   Tire removal machine should also pay attention to its applicable external di

Unlike the middle-wave and long-wave infrared, the wavelength short-wave has a strong penetration, straight into the paint. Then the temperature of the body shell with will be raised quickly with heat effect, the moisture of the coating volatilize from inside to outside quickly. In the same chemical frequency, due to the syntony of the paint which increase the possibility of the cross-linked and accelerate the curing of the layer. Therefore, the paint surface is gloss and fullness and the mirror more clear. Coating adhesion is strong and not easy to produce “orange peel, tearing” phenomenon avoid rework. Reduce costs and improve efficiency. Applications: Car Paint (Used in auto local paint, short-wave infrared lamp. There is no need to use spray booth when baking small area, convenience, save time, economical.) Tool Paint Evaporation of water Closure glaze Used short-wave infrared curing lamp can cut down the energy cost to 75%. Each lights working life is 5000-7